CEE     |     NE2CSL     |     ECL     |     MESL

Peer-reviewed Journals

  1.  H. Cho†, H. Seo†, J. Min, J. Won, J. Hong*, K.J. Yoon*. “In situ synthesis of cobalt-embedded gadolinia-doped ceria nanocatalysts for high-temperature solid oxide cells”. Journal of Materials Chemistry A, 12 (2024) 28002.
    † these authors contributed equally to this work
    ※ featured as an inside front cover 
  2. S. Choi†, J. Lim†, G.D. Nam, G. Lee, Y. Kwon, H.J. Lee, I. John, T.H. Shin*, J. Hong*, J.H. Joo*. “Designing the Solid Oxide Electrochemical Cell for Superior Thermal Shock Resistance”. ACS Energy Letters, 9(8) (2024) 3643-4208.
    † these authors contributed equally to this work
  3.  J. Yu, J. Hong, Y. Lee. “Parametric evaluation of the operating conditions for NO reduction in flameless combustion of an H2/NH3/N2 fuel mixture”. International Journal of Hydrogen Energy, 74 (2024) 404.
  4. M. Kim†, H.M. You†, J. Jeon, J. Lim, Y. Han, K. Kim*, J. Hong*. “Thermal decomposition mechanism of lithium methyl carbonate in solid electrolyte interphase layer of lithium-ion battery”. Energy Storage Materials, 70 (2024) 103517.
    † these authors contributed equally to this work
  5. J. Park, W. Yang, S. Jung, H. Lee, J. Hong, Y. Lee, S. Kim. “Assessment of energy self-sufficiency of a smart farm through integrated modeling of air-source heat pumps and solar power generation”. Applied Energy, 367 (2024) 123398.
  6. J. Jeon†, M. Kim†, M.Y. Hwang, C. Yang, J. Hong*. “Dehydration kinetics of the synthesis of high-nickel cathode materials used in lithium ion batteries”. Journal of Materials Chemistry A, 12 (2024) 8900.​
    † these authors contributed equally to this work
  7. W. Lee, Y. Bae, S. Lee, J. Hong*. “Elucidating the dynamic transport phenomena of solid oxide fuel cells according to rapid electrical load change operation”. Applied Energy, 359 (2024) 122678.
  8. M. Choi, D. Kim, C.B. Lee, J. Baek, S. Bang, Y. Jung, K. Hong, J. Hong, D. Chen, K. Kim, W. Lee*. “Engineering the heterogeneous catalyst of protonic ceramic electrochemical cells for CO2/H2O co-electrolysis”. Journal of Materials Chemistry A, 12 (2024) 6955.
  9. H. Kwak, J. Lee, Y. Lee, T. Chae*, W. Yang*, J. Kim, J. Hong. “Characteristics of combustion and ash deposition for pulverized coal combustion under various thermal loads: An experimental study in an 80 kWth combustion system”. Journal of Mechanical Science and Technology, 38 (2024) 979.
  10. H. Seo†, S. Jang†, W. Lee†, K.T. Bae, K.T. Lee*, J. Hong*, K.J. Yoon*. “Highly Efficient, Coke-Free Electrolysis of Dry CO2 in Solid Oxide Electrolysis Cells”. Chemical Engineering Journal, 481 (2024) 148532.
    † these authors contributed equally to this work
  11. I. Woo, W. Lee, D. Yoon, M. Lang, R. Costa, I.S. Lee, Y.S. Lee, J. Hong*. “Electrochemical performance analysis of a commercial-scale planar solid oxide fuel cell stack and its sensitivity to operating parameters”. Journal of Power Sources, 592 (2024) 233927.
  12. D. Yoon, M. Lang, R. Costa, J. Hong*. “Effective diffusional limitation modeling of a heterogeneous reaction system for computational fluid dynamics application”. Chemical Engineering Journal, 479 (2024) 147578.
  13. K. Hong†, M. Choi†, Y. Bae, J. Min, J. Lee, D. Kim, S. Bang, H.K. Lee, W. Lee*, J. Hong*. “Direct methane protonic ceramic fuel cells with self-assembled Ni-Rh bimetallic catalyst”. Nature Communications, 14 (2023) 7485.
    † these authors contributed equally to this work
  14. M. Lang*, Y.S. Lee, I.S. Lee, P. Szabo, J. Hong, J. Cho, R. Costa. “Analysis of Electrochemical Degradation Phenomena of SOC Stacks Operated in Reversible SOFC/SOEC Cycling Mode”. Journal of the Electrochemical Society, 170 (2023) 114516.
  15. J. Min†, H. Seo†, J. Shin, M.Y. Park, S.Y. Park, S. Park, S. Yang, H.J. Chang, J. Hong*, K.J. Yoon*. “Atomically Dispersed Platinum Electrocatalysts Supported on Ceria Nanoparticles for Practical High-Temperature Solid Oxide Cells”. Journal of Materials Chemistry A, 11 (2023) 25298.
    † these authors contributed equally to this work
    ※ featured as an inside back cover
  16. S. Choi, J. Hong*. “Versatile thermodynamic design of a solid oxide electrolysis cell system and its sensitivity to operating conditions”. Energy Conversion and Management, 298 (2023) 117776.
  17. M. Kim, J. Jeon, J. Hong*. “Reaction mechanism study and modeling of thermal runaway inside a high nickel-based lithium-ion battery through component combination analysis”. Chemical Engineering Journal, 471 (2023) 144434.
  18. Y.J. Park, G.B. Min, J. Hong*. “Optimal method for the anode exhaust gas recycling of atmospheric solid oxide fuel cell-combined heat and power systems”. Journal of Power Sources, 567 (2023) 232970.
  19. D. Yoon, J. Kim, D.H. Kim, J. Hong*. “Elucidating the sensitivity to key operating parameters of a commercial-scale solid oxide fuel cell stack with open cathode manifolds”. Energy Conversion and Management, 283 (2023) 116934.
  20. K. Hong, J. Min, G. Min, Y. Bae, J. Hong*. “Carbon-neutral conversion of methane supported by Ni-(Rh, Co) bimetallic catalysts for low-temperature proton-conducting ceramic fuel cells”. Chemical Engineering Journal, 462 (2023) 142334.
  21. G.B. Min†, S. Choi†, J. Hong*. “A review of solid oxide steam-electrolysis cell systems: thermodynamics and thermal integration”. Applied Energy, 328 (2022) 120145.
    † these authors contributed equally to this work
  22. S. Oh, M.J. Oh, J. Hong, K.J. Yoon, H.I. Ji, J.H. Lee, H. Kang, J.W. Son, S. Yang. “A comprehensive investigation of direct ammonia-fueled thin-film solid-oxide fuel cells: Performance, limitation, and prospects”. iScience, 25(9) (2022) 105009.
  23. Y. Bae, J. Hong*. “Enhancement of surface morphology and catalytic kinetics of NiAl2O4 spinel-derived Ni catalyst to promote dry reforming of methane at low temperature for the direct application to a solid oxide fuel cell”. Chemical Engineering Journal, 446 (2022) 136978.
  24. M.Y. Park, S.Y. Park, H. Seo, J.M. Jung, H.K. Hwang, J. Hong, J.Y. Park, I. Lee, K.J. Yoon. “Construction of high-temperature electronic conduction paths for the scale-up of solid oxide fuel cell technology”. Journal of Materials Chemistry A, 10 (2022) 11917.
  25. J. Lee, Y. Bae, K. Hong, J. Hong*. “Comparative evaluation of Ni-based bimetallic catalysts for dry reforming of methane at low temperature: the effect of alloy itself on performance”. International Journal of Energy Research, 46(8) (2022) 11228.
  26. G.B. Min, Y.J. Park, S. Choi, J. Hong*. “Sensitivity analysis of a solid oxide co-electrolysis cell system with respect to its key operating parameters and optimization with its performance map”. Energy Conversion and Management, 249 (2021) 114848.
  27. J. Kim, D.H. Kim, W. Lee, S.H. Lee, J. Hong*. “A novel interconnect design for thermal management of a commercial-scale planar solid oxide fuel cell stack”. Energy Conversion and Management, 246 (2021) 114682.
  28. Y.J. Park, G.B. Min, J. Hong*. “Operational guidelines for a residential solid oxide fuel cell-combined heat and power system with an optimal system layout design”. Energy Conversion and Management, 246 (2021) 114666.
  29. J. Won, H. Oh, J. Hong, M. Kim, W.Y. Lee, Y.Y. Choi, S.B. Han. “Hybrid diagnosis method for initial faults of air supply systems in proton exchange membrane fuel cells”. Renewable Energy, 180 (2021) 343.
  30. T. Kim, S.D. Park, U.D. Lee, B.C. Park, K.I. Park, J. Hong*. “Thermodynamic analysis of the 2nd generation pressurized fluidized-bed combustion cycle utilizing an oxy-coal boiler and a gasifier”. Energy, 236 (2021) 121471.
  31. K. Hong, S.N. Sutanto, J. Lee, J. Hong*. “Ni-based bimetallic nano-catalysts anchored on BaZr0.4Ce0.4Y0.1Yb0.1O3 for internal steam reforming of methane in a low-temperature proton-conducting ceramic fuel cell”. Journal of Materials Chemistry A, 9 (2021) 6139.
    ※ featured as an inside front cover
    ※ This article is part of the themed collection: Journal of Materials Chemistry A HOT Papers
  32. J. Shin, S. Yang, H.I. Ji, S. Park, H. Kim, J.W. Son, J.H. Lee, B.K. Kim, J. Hong, K.J. Yoon. “Low-temperature processing technique of Ruddlesden-Popper cathode for high performance solid oxide fuel cells”. Journal of Alloys and Compounds, 868 (2021) 159092.
  33. G.B. Min, Y.J. Park, J. Hong*. “Thermodynamic analysis of a solid oxide co-electrolysis cell system for its optimal thermal integration with external heat supply”. Energy Conversion and Management, 225 (2020) 113381.
  34. J. Shin, Y.J. Lee, A. Jan, S.M. Choi, M.Y. Park, S. Choi, J.Y. Hwang, S. Hong, S.G. Park, H.J. Chang, M.K. Cho, J.P. Singh, K.W. Chae, S. Yang, H.I. Ji, H. Kim, J.W. Son, J.H. Lee, B.K. Kim, H.W. Lee, J. Hong, Y.J. Lee, K.J. Yoon. “Highly active and thermally stable single-atom catalysts for high-temperature electrochemical devices”. Energy & Environmental Science, 13 (2020) 4903.
  35. D.H. Kim, Y. Bae, S. Lee, J.W. Son, J.H. Shim*, J. Hong*. “Thermal analysis of a 1-kW hydrogen-fueled solid oxide fuel cell stack by three-dimensional numerical simulation”. Energy Conversion and Management, 222 (2020) 113213.
  36. G.B. Min, Y.J. Park, J. Hong*. “1D thermodynamic modeling for a solid oxide fuel cell stack and parametric study for its optimal operating conditions”. Energy Conversion and Management, 209 (2020) 112614.
  37. Y. Bae, S.H. Lee, J. Hong*. “The effect of anode microstructure and fuel utilization on current relaxation and concentration polarization of solid oxide fuel cell under electrical load change”. Energy Conversion and Management, 201 (2019) 112152.
  38. Y.J. Park, G.B. Min, J. Hong*. “Comparative study of solid oxide fuel cell-combined heat and power system designs for optimal thermal integration”. Energy Conversion and Management, 182 (2019) 351-368.
  39. H.Y. Jeong, S.W. Kim, Y. Bae, K.J. Yoon, J.H. Lee, J. Hong*. “Effect of Fe infiltration to Ni/YSZ solid-oxide-cell fuel-electrode on steam/CO2 co-electrolysis”. International Journal of Energy Research, 43(9) (2019) 4949-4958.
  40. S.H. Lee, Y. Bae, K.J. Yoon, J.H. Lee, W. Choi, J. Hong*. “Key characteristics of a hydrocarbon-fueled solid oxide fuel cell examined by local thermodynamic states”. Energy Conversion and Management, 174 (2018) 565-578.
  41. Y. Bae, S.H. Lee, K.J. Yoon, J.H. Lee, J. Hong*. “Three-dimensional dynamic modeling and transport analysis of solid oxide fuel cells under electrical load change”. Energy Conversion and Management, 165 (2018) 405-418.
  42. S.W. Kim, Y. Bae, K.J. Yoon, J.H. Lee, J.H. Lee, J. Hong*. “High-temperature electrolysis of CO2-enriched mixtures by using fuel-electrode supported La0.6Sr0.4CoO3/YSZ/Ni-YSZ solid oxide cells”. Journal of Power Sources, 378 (2018) 369-374.
  43. H.Y. Jeong, K.J. Yoon, J.H. Lee, Y.C. Chung, J. Hong*. “Long-term stability for co-electrolysis of CO2/steam assisted by catalyst-infiltrated solid oxide cells”. Journal of the Korean Ceramic Society, 55(1) (2018) 50-54.
  44. S. Lee, S. Lee, H.J. Kim, S.M. Choi, H. An, M.Y. Park, J. Shin, J.H. Park, J. Ahn, D. Kim, H.I. Ji, H. Kim, J.W. Son, J.H. Lee, B.K. Kim, H.W. Lee, J. Hong, D. Shin, K.J. Yoon. “Highly durable solid oxide fuel cells: suppressing chemical degradation via rational design of a diffusion-blocking layer”. Journal of Materials Chemistry A, 6 (2018) 15083-15094.
  45. Y.D. Kim, J.I. Lee, M. Saqib, K.Y. Park, J. Hong, K.J. Yoon, I. Lee, J.Y. Park. “Degradation of anode-supported solid oxide fuel cells under load trip and cycle conditions and their degradation prevention operating logic”. Journal of the Electrochemical Society, 165(9) (2018) F728-F735.
  46. I. Lee, M.Y. Park, H.J. Kim, J.H. Lee, J.Y. Park, J. Hong, K.I. Kim, M. Park, J.Y. Yun, K.J. Yoon. “High-temperature current collection enabled by in-situ phase transformation of cobalt-nickel foam for solid oxide fuel cells”. ACS Applied Materials & Interfaces, 9(45) (2017) 39407-39415.
  47. S.K. Jaiswal, J. Hong, K.J. Yoon, J.W. Son, J.H. Lee. “Synthesis and conductivity behavior of proton conducting (1-x)Ba0.6Sr0.4Ce0.75Zr0.10Y0.15O3- δ-xGDC (x=0, 0.2, 0.5) composite electrolytes”. Journal of the American Ceramic Society, 100(10) (2017) 4710-4718.
  48. S.W. Kim, M. Park, H. Kim, K.J. Yoon, J.W. Son, J.H. Lee, B.K. Kim, J.H. Lee, J. Hong*. “In-situ nano-alloying Pd-Ni for economical control of syngas production from high-temperature thermo-electrochemical reduction of steam/CO2”. Applied Catalysis B: Environmental, 200 (2017) 265-273.
  49. S.H. Lee, M. Park, H. Kim, K.J. Yoon, J.W. Son, J.H. Lee, B.K. Kim, W. Choi, J. Hong*. “Thermal conditions and heat transfer characteristics of high-temperature solid oxide fuel cells investigated by three-dimensional numerical simulations”. Energy, 120 (2017) 293-305.
  50. K.J. Yoon, M. Biswas, H.J. Kim, M. Park, J. Hong, H. Kim, J.W. Son, J.H. Lee, B.K. Kim, H.W. Lee. “Nano-tailoring of infiltrated catalysts for high-temperature solid oxide regenerative fuel cells”. Nano Energy, 36 (2017) 9-20.
  51. C.A. Thieu, J. Hong, H. Kim, K.J. Yoon, J.H. Lee, B.K. Kim, J.W. Son. “Incorporation of a Pd catalyst at the fuel electrode of a thin-film-based solid oxide cell by multi-layer deposition and its impact on low-temperature co-electrolysis”. Journal of Materials Chemistry A, 5 (16) (2017) 7433-7444.
  52. K. Bae, D.Y. Jang, H.J. Choi, D.H. Kim, J. Hong, B.K. Kim, J.H. Lee, J.W. Son, J.H. Shim. “Demonstrating the potential of yttrium-doped barium zirconate electrolyte for high-performance fuel cells”. Nature Communications, 8 (2017) 14553.
  53. S.J. Choi, B.I. Sang, J. Hong, K.J. Yoon, J.W. Son, J.H. Lee, B.K. Kim, H. Kim. “Catalytic behavior of metal catalysts in high-temperature RWGS reaction: in-situ FT-IR experiments and first-principles calculations”. Scientific Reports, 7 (2017) 41207/1-41207/10.
  54. S.H. Lee, D.W. Shin, M. Park, J. Hong, H. Kim, J.W. Son, J.H. Lee, B.K. Kim, H.W. Lee, K.J. Yoon. “Highly controlled thermal behavior of a conjugated gadolinia-doped ceria nanoparticles synthesized by particle-dispersed glycine-nitrate process”. Journal of the European Ceramic Society, 37 (5) (2017) 2159-2168.
  55. S.I. Lee, M. Park, J. Hong, H. Kim, J.W. Son, J.H. Lee, B.K. Kim, H.W. Lee, K.J. Yoon. “Fabrication of dense and defect-free diffusion barrier layer via constrained sintering for solid oxide fuel cells”. Journal of the European Ceramic Society, 37 (9) (2017) 3219-3223.
  56. S.W. Kim, M. Park, H. Kim, K.J. Yoon, J.W. Son, J.H. Lee, B.K. Kim, J.H. Lee, J. Hong*. “Catalytic effect of Pd-Ni bimetallic catalysts on high-temperature co-electrolysis of steam/CO2 mixtures”. Journal of the Electrochemical Society, 163 (11) (2016) F3171-F3178.
  57. S.H. Lee, H. Kim, K.J. Yoon, J.W. Son, J.H. Lee, B.K. Kim, W. Choi, J. Hong*. “The effect of fuel utilization on heat and mass transfer within solid oxide fuel cells examined by three-dimensional numerical simulations”. International Journal of Heat and Mass Transfer, 97 (2016) 77-93.
  58. S.M. Choi, J.H. Lee, J. Hong, K.J. Yoon, J.W. Son, B.K. Kim, H.W. Lee, J.H. Lee. “Degradation of hydration kinetics of proton-conducting Ba(Zr0.84Y0.15Cu0.01)O3- δ during conductivity-relaxation experiment”. Journal of Power Sources, 332 (2016) 299-304.
  59. H.I. Ji, J. Hong, K.J. Yoon, J.W. Son, B.K. Kim, H.W. Lee, J.H. Lee. “Investigation of the electrochemical reactions at a limited-contact La1-xSrxMnO3/Y-doped ZrO2 interface with a rod-type ionic-probe”. Journal of Power Sources, 330 (2016) 285-291.
  60. S.K. Jaiswal, S.M. Choi, J. Hong, K.J. Yoon, J.W. Son, B.K. Kim, H.W. Lee, J.H. Lee. “On the sol-gel synthesis and characterization of (BaSr)(CeZr)O3-based fuel cell electrolytes”. Ionics, 22 (12) (2016) 2529-2538.
  61. H.W. Lee, M. Park, J. Hong, H. Kim, K.J. Yoon, J.W. Son, J.H. Lee, B.K. Kim. “Constrained sintering in fabrication of solid oxide fuel cells”. Materials, 9 (2016) 675.
  62. S.H. Song, J. Moon, J.H. Kim, J. Hong, J.H. Lee, H.W. Lee, B.K. Kim, H. Kim. “Panoscopic alloying of cobalt in CeO2-ZrO2 solid solutions for superior oxygen-storage capacity”. Acta Materialia, 113 (2016) 206-212.
  63. H.P. Dasari, K. Ahn, S.Y. Park, J. Hong, H. Kim, K.J. Yoon, J.W. Son, B.K. Kim, H.W. Lee, J.H. Lee. “Record-low sintering-temperature (600°C) of solid-oxide fuel cell electrolyte”. Journal of Alloys and Compounds, 672 (2016) 397-402.
  64. S.K. Jaiswal, J. Hong, K.J. Yoon, J.W. Son, H.W. Lee, J.H. Lee. “Optical absorption and XPS studies of (Ba1-xSrx)(Ce0.75Zr0.10Y0.15)O3- δ electrolytes for protonic ceramic fuel cells”. Ceramics International, 42 (2016) 10366-10372.
  65. K. Bae, H.S. Noh, D.Y. Jang, J. Hong, H. Kim, K.J. Yoon, J.H. Lee, B.K. Kim, J.H. Shim, J.W. Son. “High-performance thin-film protonic ceramic fuel cells fabricated on anode supports with a non-proton-conducting ceramic matrix”. Journal of Materials Chemistry A, 4 (2016) 6395-6403.
  66. H. Kim, J. Hong, K.J. Yoon, J.W. Son, J.H. Lee, B.K. Kim, H.W. Lee. “High-performance and robust operation of anode-supported solid oxide fuel cells in mixed-gas atmosphere”. International Journal of Energy Research, 40 (2016) 726-732.
  67. J.H. Park, S.M. Han, K.J. Yoon, H. Kim, J. Hong, B.K. Kim, J.H. Lee, J.W. Son. “Impact of nanostructured anode on low-temperature performance of thin-film-based anode-supported solid oxide fuel cells”. Journal of Power Sources, 315 (2016) 324-330.
  68. C. Seok, J. Moon, M. Park, J. Hong, H. Kim, J.W. Son, J.H. Lee, B.K. Kim, H.W. Lee, K.J. Yoon. “Low-temperature co-sintering technique for the fabrication of multi-layer functional ceramics for solid oxide fuel cells”. Journal of the European Ceramic Society, 36 (6) (2016) 1417-1425.
  69. H.S. Noh, J. Hong, H. Kim, K.J. Yoon, B.K. Kim, H.W. Lee, J.H. Lee, J.W. Son. “Scale-up of thin-film deposition-based solid oxide fuel cell by sputtering, a commercially viable thin-film technology”. Journal of the Electrochemical Society, 163 (7) (2016) F613-F617.
  70. M. Biswas, J. Hong, H. Kim, J.W. Son, J.H. Lee, B.K. Kim, H.W. Lee, K.J. Yoon. “Thermal evolution of BaO-CuO flux as sintering aid for proton conducting ceramic fuel cells”. Journal of the Korean Ceramic Society, 53(5) (2016) 506-510.
  71. J. Hong, P. Kirchen, A.F. Ghoniem. “The coupling effect of gas-phase chemistry and surface reactions on oxygen permeation and fuel conversion in ITM reactors”. Journal of Membrane Science, 488 (2015) 1-12.
  72. S.W. Kim, H. Kim, K.J. Yoon, J.H. Lee, B.K. Kim, W. Choi, J.H. Lee, J. Hong*. “Reactions and mass transport in high temperature co-electrolysis of steam/CO2 mixtures for syngas production”. Journal of Power Sources, 280 (2015) 630-639.
  73. C. Jeong, J.H. Lee, M. Park, J. Hong, H. Kim, J.W. Son, J.H. Lee, B.K. Kim, K.J. Yoon. “Design and processing parameters of La2NiO4+δ-based cathode for anode-supported planar solid oxide fuel cells (SOFCs)”. Journal of Power Sources, 297 (2015) 370-378.
  74. S.M. Choi, J.H. Lee, M.B. Choi, J. Hong, K.J. Yoon, B.K. Kim, H.W. Lee, J.H. Lee. “Determination of electronic and ionic partial conductivities of BaCeO3 with Yb and In doping”. Journal of the Electrochemical Society, 162 (7) (2015) F789-F795.
  75. H.S. Noh, J. Hong, H. Kim, K.J. Yoon, J.H. Lee, B.K. Kim, J.W. Son. “Sandwiched ultra-thin yttria-stabilized zirconia layer to effectively and reliably block reduction of thin-film gadolinia-doped ceria electrolyte”. Journal of the Ceramic Society of Japan, 123 (4) (2015) 263-267.
  76. J. Hwang, H. Lee, J.H. Lee, K.J. Yoon, H. Kim, J. Hong, J.W. Son. “Specific considerations for obtaining appropriate La1-xSrxGa1-yMgyO3-δ thin films using pulsed-laser deposition and its influence on the performance of solid-oxide fuel cells”. Journal of Power Sources, 274 (2015) 41-47.
  77. K. Bae, H.S. Noh, D.Y. Jang, M. Kim, H.J. Kim, J. Hong, J.H. Lee, B.K. Kim, J.W. Son, J.H. Shim. “Fabrication of NiO-Y: BaZrO3 composite anode for thin film-protonic ceramic fuel cells using tape-casting”. Journal of the Korean Ceramic Society, 52(5) (2015) 320-324.
  78. J. Hong, H.J. Kim, S.Y. Park, J.H. Lee, S.B. Park, J.H. Lee, B.K. Kim, H.J. Je, J.Y. Kim, K.J. Yoon. “Electrochemical performance and long-term durability of a 200W-class solid oxide regenerative fuel cell stack”. International Journal of Hydrogen Energy, 39 (35) (2014) 20819-20828.
  79. D. Kennouche†, J. Hong†, H.S. Noh, J.W. Son, S.A. Barnett. “Three-dimensional microstructure of high-performance pulsed-laser deposited Ni-YSZ SOFC anodes”. Physical Chemistry Chemical Physics, 16 (29) (2014) 15249-15255.
    † these authors contributed equally to this work
  80. T. Yeo, H. Hwang, D.C. Jeong, K.Y. Lee, J. Hong, C. Song, W. Choi. “Effects of chemical fuel composition on energy generation from thermopower waves”. Nanotechnology, 25 (44) (2014) 445403.
  81. H.P. Dasari, J.S. Ahn, K. Ahn, S.Y. Park, J. Hong, H. Kim, K.J. Yoon, J.W. Son, H.W. Lee, J.H. Lee. “Synthesis, sintering and conductivity behavior of ceria-doped Scandia-stabilized zirconia”. Solid State Ionics, 263 (2014) 103-109.
  82. S.M. Choi, J.H. Lee, H. An, J. Hong, H. Kim, K.J. Yoon, J.W. Son, B.K. Kim, H.W. Lee, J.H. Lee. “Fabrication of anode-supported protonic ceramic fuel cell with Ba(Zr0.85Y0.15)O3-δ -Ba(Ce0.9Y0.1)O3-δ dual-layer electrolyte”. International Journal of Hydrogen Energy, 39 (24) (2014) 12812-12818.
  83. I.Y. Kim, M. Biswas, J. Hong, K.J. Yoon, J.W. Son, J.H. Lee, B.K. Kim, H.J. Je, H.W. Lee. “Effect of internal and external constraints on sintering behavior of thin film electrolytes for solid oxide fuel cells (SOFCs)”. Ceramics International, 40 (8) (2014) 13131-13138.
  84. S.M. Choi, J.H. Lee, J. Hong, H. Kim, K.J. Yoon, B.K. Kim, J.H. Lee. “Effect of sintering atmosphere on phase stability, and electrical conductivity of proton-conducting Ba(Zr0.84Y0.15Cu0.01)O3-δ”. International Journal of Hydrogen Energy, 39 (13) (2014) 7100-7108.
  85. S.I. Lee, J. Hong, H. Kim, J.W. Son, J.H. Lee, B.K. Kim, H.W. Lee, K.J. Yoon. “Highly dense Mn-Co spinel coating for protection of metallic interconnect of solid oxide fuel cells”. Journal of the Electrochemical Society, 161 (14) (2014) F1389-F1394.
  86. J.H. Park, W.S. Hong, J.H. Lee, K.J. Yoon, H. Kim, J. Hong, H.S. Song, J.W. Son. “Facile fabrication of YSZ/GDC multi-layers by using a split target in pulsed laser deposition and their structural and electrical properties”. Journal of Electroceramics, 33 (2014) 25-30.
  87. S.I. Lee, M.B. Choi, H.P. Dasari, J. Hong, H. Kim, J.W. Son, J.H. Lee, B.K. Kim, H.J. Je, K.J. Yoon. “Role of ceria-zirconia solid solution with high oxygen storage capacity in cermet anodes of solid oxide fuel cells”. Journal of the Electrochemical Society, 161 (9) (2014) F883-F888.
  88. J. Hong, P. Kirchen, A.F. Ghoniem. “Analysis of heterogeneous oxygen exchange and fuel oxidation on the catalytic surface of perovskite membranes”. Journal of Membrane Science, 445 (2013) 96-106.
  89. J. Hong, P. Kirchen, A.F. Ghoniem. “Interactions between oxygen permeation and homogeneous-phase fuel conversion on the sweep side of an ion transport membrane”. Journal of Membrane Science, 428 (2013) 309-322.
  90. J. Hong, P. Kirchen, A.F. Ghoniem. “Laminar oxy-fuel diffusion flame supported by an oxygen-permeable-ion-transport membrane”. Combustion and Flame, 160 (3) (2013) 704-717.
  91. J. Hong, P. Kirchen, A.F. Ghoniem. “Numerical simulation of ion transport membrane reactors: Oxygen permeation and transport and fuel conversion”. Journal of Membrane Science, 407-408 (2012) 71-85.
  92. J. Hong, R. Field, M. Gazzino, A.F. Ghoniem. “Operating pressure dependence of the pressurized oxy-fuel combustion power cycle”. Energy, 35 (12) (2010) 5391-5399.
  93. J. Hong, G. Chaudhry, J.G. Brisson, R. Field, M. Gazzino, A.F. Ghoniem. “Analysis of oxy-fuel combustion power cycle utilizing a pressurized coal combustor”. Energy, 34 (9) (2009) 1332-1340.
TOP